10-2400 PSIG Relief Valve
Description
Circle Seal Controls Model M5162T-8M Relief Valve
Catalog literature: Relief Valves Catalog.pdf 
The Circle Seal Controls model M5162T-8M relief valve provides a combination of absolute leak-proof sealing when closed and virtually maintenance-free dependability in a relatively small, lightweight package.
Features:
- Zero leakage: to 95-98% of cracking pressure
- Positive reseat: reseals dead tight only slightly below the cracking pressure
- Accurate set pressure: valves can be pre-set to required cracking pressure
- Adjustable: interchangeable springs permit change of crack pressure range; tamper-proof adjustment inside of valve
- Excellent flow characteristics: lift ring poppet design allows high flow rates with minimum amount of pressure rise
- No chatter: chatter eliminated through use of friction damping device; damping bars prevent poppet from over-travel at initial cracking thrust; damping load is proportional to spring load
- Minimal maintenance: fluid is not throttled across the seal, which, combined with soft seat and poppet design, prevents seat and seal erosion
- Versatile: vent-to-atmosphere or inline connections; various materials for both body and seals; sizes ranging from 1/8″ to 1-1/4″; PED certifications and CE marking available for most models
Technical Data:
- Configuration: Popoff with manual override
- Cracking pressure: 10-2400 PSIG
- Body material: 303SS
- Seal material: EPR
- Connection: 1″ MNPT
- Temp range: -65 to +300F
Dimensions:
- Handle type: Ring (for cracking pressures up to 450 psig); Lever (for cracking pressures above 450 psig)
- “B” & “H” dimensions (diameter / hex): 1.50″
- “E” dimension (length) for cracking pressures between 10-450 psig: 5.59″
- “M” dimension (length) for cracking pressures between 451-2400 psig: 7.72″
